Viziteaza magazinul www.fxmodells.ro pe ShopMania

 
Aeromodele > Airplanes
GAMA 2100 - RTF M2 4ch 2.4GHz brushless




Almost finished model performance motor glider powered by an AC motor from extruded foamed polypropylene (EPP). Complete Set with RC transmitter in the second mode Controlled ailerons, rudder, elevator, flaps can be added.

New GAMA 2100 at a glance builds on our successful and very popular Alpha 1500. In addition to the simple increase in size (range 2100 mm) are endowed gave her a thorough construction of EPP foam ingeniously paved reinforcements of carbon pipes and flanges; standard control functions (aileron, rudder, elevator, engine speed), we have added the ability to control the flaps. GAMA 2100 because it represents an excellent model for school beginners - is large and therefore easily "readable" in the air is stable and has excellent lubricity - as well as an ideal recreational model, which can further "breed" and without large additional costs to meet the piloting "proper" gliders with advanced mechanization wings.


Preserved remains of course proven benefits of Alpha wing with a large bearing area controlled by the ailerons, rudder and elevator, powerful AC motor drive. Robust - yet very lightweight - construction of EPP foam with carbon reinforcements ensures excellent resistance to damage in a crash, or at least very easily repairable, if any damage already there. To power the engine is a lightweight Li-poly battery with a large capacity model is controlled by a five-channel option best RC kits CADET 4 2.4 GHz FHSS ensures high resistance to interference and the possibility of providing additional supplement flaps. Of course there are no worries with crystals and free / occupied channels ... We just take care of to make your moments of relaxation in recreational flying, ground-complicate worry "material nature."

GAMA 2100 is a powerful motor glider made from high grade extruded polypropylene EPP driven by an AC motor. The hull fitted with a motor (outrunner, C2835, 100 rev. / Min to V), the controller 25 A and rudder and elevator servos is extracted from EPP foam, solid "backbone" of the fuselage is a carbon tube. Canopy is removable with magnetic closures. The speed controller is easily programmed using the transmitter, it can be powered from a Li-po, i LiFe NiCd / NiMH batteries, the most important is that it has a powerful built-in Switching Regulator SBEC enabling power onboard electronics with up to six servos - thanks to the addition of two more servos for flaps very easy. The propeller is reclining, with turbokuželem with openings for cooling air in the middle. Cooling motor, controller and battery helps more cooling air inlets on the sides of the nose, necessary outlet for heated air vents are on the sides of the hull in the area under the wing.

Two-piece wing with the proven "soaring" profile is also molded from EPP, wings (reinforced carbon flanges) are controlled by 2 servos stored in the wing with a short straight wire rods. Wing halves are joined two carbon pipe connections; releasing halves of the wings in flight prevents the plastic clips "nacvakávané" on the clutch. Flaps (reinforced carbon flange) and pits for their servos are already in pre-stamped wing - just enough to cut through the slot on both short sides and mounted servo - servo brackets with handles and levers are part of the delivery model. "Hot Rods" Set servo valves for GAMU 2100 is sold as a separate accessory.

The tail surfaces in a classical arrangement are made of EPP, are controlled by means of wire cables. The elevator is again reinforced carbon flange.

Preparing to fly the model in the standard version only includes mounting tail (gluing medium glue), deployment of wing halves and connect the drive battery. Controlled by the ailerons, rudder, elevator and motor speed.

The control model is the five channel transmitter CADET 4 +1 2.4GHz FHSS (frequency hopping system with spread spectrum) with cross controllers arranged in Mode 1 (throttle right), trims and switches sense deflections for all channels. Compared to the standard version čtyřkanálovému also has a fifth channel operated dip switch that you can use for flaps. It is also equipped with a charging plug for charging the transmitter battery in the transmitter (suitable charger are Hitec CG-22, CG-S32). To power the transmitter will need 8 AA (AA-size) alkaline batteries or rechargeable batteries (not included RC set). If you do not like holding the transmitter in your hands, you can add a strap Hitec (# 8311) or place it in a tray to transmitter Optic 6 (just to be generous with foam tape on the sides of the transmitter housing).

Like the other our sets the RC equipment can be later used in other models of the same category.

GAMA 2100 is designed for beginners - as always supply - under the supervision of an experienced pilot, as well as for anyone who wants just so beautiful holiday travels. Flight characteristics are pleasant, straightforward and accurate control of the model. Model will acquaint you with full control of the model around all three axes coordinated control with the right rudder, ailerons and elevator. This experience is "like finding" no later than right after you start flying with their first aerobatic model or even greater glider. By changing the ratio of the lengths of servo and rudder deflections can adjust the size of a large range. Beginner, start with small, safe and excessive "steerage"; experienced pilot sets the size, allowing a little bit of that basic engine-větroňové aerobatics - loops, barrel rolls, headland turns go game with a little help from the engine very easy and good! The power is sufficient for sustained climb at an angle of about 30-40 degrees, so to gain sufficient height for catching thermals will not be long! GAMA 2100 is sensitive even to weak thermals easily with the precise control about all axes settles into the rising stack of small diameter. And with controlled flaps it will still completely different story!

GAMA 2100 is supplied with a Li-poly battery 11.1V 1500 mAh, which corresponds to the standard folding propeller 10x7. "Model no problems" can carry "tříčlánky until about 3300 mAh, the optimal set of 1800-2700 mAh.

RC set includes: body molded from EPP with mounted AC motor, folding propeller 10x7 "speed controller 25A, six-channel 2.4GHz FHSS receiver and 2 servos, wing molded EPP installed with 2 servos, tail of EPP, 2 carbon tube wing joiner , five channel transmitter CADET 4 +1 2.4GHz FHSS mode 2, power pack Li-poly 1500 mAh 11.1 V, 12 V fast charger, accessories for control valves and detailed instructions for building and flying.

Specifications
Span (mm) 2100
Length (mm) 1230
Wing area (dm2) 37.3
Weight (g) of about 1 150-1 300
Function V, K (2) S, M, can be supplemented F (2)
Difficulty S0/P1-2

   
   
   
   
   
   
   

Deprecated: Assigning the return value of new by reference is deprecated in /home/fx/public_html/bbclone/lib/io.php on line 151

Parse error: syntax error, unexpected end of file, expecting variable (T_VARIABLE) or ${ (T_DOLLAR_OPEN_CURLY_BRACES) or {$ (T_CURLY_OPEN) in /home/fx/public_html/bbclone/var/last.php on line 137