Viziteaza magazinul www.fxmodells.ro pe ShopMania
Electronica > FPV
RadioLink PRM-03 OSD Telemetry Module



OSD (On-Screen-Display) PRM-03 Telemetry Module manufactured by Radiolink.

 

OST Telemetry module transmits the data from the flight controller and shows the data of: SPEED, RISE, THRO, VOLT, LATI, LONG, ALT, GPS, RSSI, MODE, YAW, ROLL. PITC, DIST in the display screen of AT9, AT9S, AT10 or AT10II

Attention! the old version of AT9 and AT10 have to upgrade the firmware when use PRM-03 to telemetry OSD information. Upgrade AT9 firmware to V1.2.6(OSD) or AT10 to V1.0.6(OSD).

  • So far, OSD information telemetry module PRM-03 is compatible with flight controller PIX and APM
  • Support Radiolink receivers R9D, R9DS, R10D, R10DII, R10DS, R12DS
  • PRM-03 can telemetry speed, rise, throttle, voltage, longitude, latitude, altitude, GPS, RSSI, flight mode, YAW, ROLL, PITC, distance
  • PRM-03 is compatible with 1-12 cells battery (3.7 ~ 50.4 V)

 

Connection:

  • Connect one end of the telemetry module PRM-03 to R9D/R9DS/R10D/R10DII/R10DS/R12DS and the other end to battery if you just need feedback battery voltage. Same function as RadioLink PRM-01 if you connect like that.
  • If you want to feedback Speed, Rise, Throttle, Voltage, Longitude, Latitude, Altitude, GPS, RSSI, Flight Mode, YAW, ROLL, PITC, Distance information, please connect one end of the OSD information telemetry module PRM-03 to R9D/R9DS/R10D/R10DII/R10DS/R12DS and the other end to the TELEM port of PIX or APM.

 

Technical data:

  • Dimensions: 27x13 mm
  • Weight: 6 g (including the wires)
  • OSD information telemetry module PRM-03 is compatible with flight controller PIX and APM
  • Support Radiolink receivers R9D, R9DS, R10D, R10DII, R10DS and R12DS
  • PRM-03 can telemetry Speed, Rise, Throttle, Voltage, Longitude, Latitude, Altitude, GPS, RSSI, Flight Mode, YAW, ROLL, PITC, Distance
  • PRM-03 is compatible with 1 cell to 12 cells battery (3.7 ~ 50.4 V)
 

Deprecated: Assigning the return value of new by reference is deprecated in /home/fx/public_html/bbclone/lib/io.php on line 151

Parse error: syntax error, unexpected end of file, expecting variable (T_VARIABLE) or ${ (T_DOLLAR_OPEN_CURLY_BRACES) or {$ (T_CURLY_OPEN) in /home/fx/public_html/bbclone/var/last.php on line 137